Preston HU3/MDR-4 2-Channel FI+Z HEDEN M26 Motors KIT
The MDR-4 takes all the best features from the MDR-3 and packs them into a sleek, compact package. It accepts commands from Preston Hand Units connected via the rugged G4 wireless link and controls up to two digital motors and camera run/stop functions for film and video cameras. The MDR-4 automatically finds the span of the lens once each motor is plugged in, and each channel has its own three-level torque adjustment and direction switch to drive virtually any lens.
Two-channel motor driver (Focus and Iris or Zoom) for digital lens motors
Connects wirelessly to Preston G4 hand controls
Serial port allows connection to the Light Ranger 2 and firmware updates
Analog port enables direct connection to Micro Force and broadcast-style controls
USB port available for firmware updates
Perfect for handheld, steadicam, MÂÂVI, and other lightweight applications
The Analog port lets you plug a Micro Force or broadcast-style control directly into the MDR-4, controlling the motor of your choice as configured in the HU3 Mode menu.
The Serial port connects to the Light Ranger 2, transmitting distance information wirelessly to the HU3 and Video Interface unit. Firmware updates can be loaded through the Serial port or the mini USB port.
The Serial and USB ports also enable real-time lens metadata retrieval, outputting either mapped lens positions or raw digital motor encoder counts. You can jam the internal clock of the MDR-4 through the T/C port, and this timestamp will appear in the metadata stream as well, making it easy to extract and utilize lens position information for post-production.
The Preston HU3 Hand Unit for FI+Z System gives focus pullers not only a robust and reliable unit but one whose controls equip the focus puller to smoothly translate the changing actors' positions on set to a precise movement of the focus knob. The iris slider uses a unique non contact technology to eliminate the opening required for a conventional sliding seal. The HU3 allows for programming camera speed and shutter angle. Power is provided via FM-50 Li-Ion batteries (not included).
Generation 4 (G4) transceivers address the challenges brought about by the proliferation of wireless devices using the 2.4 GHz wireless band. Their new architecture results in a greatly improved ability to reject interference from other devices operating in the same band as well as out of band interference. The improvement in performance is quite significant, typically 10x or better interference rejection than previous transceivers.
In addition, their lower power consumption doubles the operating time of the HU3 on battery power compared to its predecessor. The latest "Blue Dot" version of the transceiver adds channels 30 – 59. These new channels allow FI+Z units to operate in very close proximity (<1m) without interference.
The HU3 integrates its 30 channel, 2.4GHz wireless link into a new splash-resistant housing. Weather-sealed, tactile switches are used throughout. The integrated microwave antenna is protected from impact. The iris slider uses a unique non contact technology to eliminate the opening required for a conventional sliding seal.
Read more about our packages and the included items below.
The MDR-4 takes all the best features from the MDR-3 and packs them into a sleek, compact package. It accepts commands from Preston Hand Units connected via the rugged G4 wireless link and controls up to two digital motors and camera run/stop functions for film and video cameras. The MDR-4 automatically finds the span of the lens once each motor is plugged in, and each channel has its own three-level torque adjustment and direction switch to drive virtually any lens.
Two-channel motor driver (Focus and Iris or Zoom) for digital lens motors
Connects wirelessly to Preston G4 hand controls
Serial port allows connection to the Light Ranger 2 and firmware updates
Analog port enables direct connection to Micro Force and broadcast-style controls
USB port available for firmware updates
Perfect for handheld, steadicam, MÂÂVI, and other lightweight applications
The Analog port lets you plug a Micro Force or broadcast-style control directly into the MDR-4, controlling the motor of your choice as configured in the HU3 Mode menu.
The Serial port connects to the Light Ranger 2, transmitting distance information wirelessly to the HU3 and Video Interface unit. Firmware updates can be loaded through the Serial port or the mini USB port.
The Serial and USB ports also enable real-time lens metadata retrieval, outputting either mapped lens positions or raw digital motor encoder counts. You can jam the internal clock of the MDR-4 through the T/C port, and this timestamp will appear in the metadata stream as well, making it easy to extract and utilize lens position information for post-production.
The Preston HU3 Hand Unit for FI+Z System gives focus pullers not only a robust and reliable unit but one whose controls equip the focus puller to smoothly translate the changing actors' positions on set to a precise movement of the focus knob. The iris slider uses a unique non contact technology to eliminate the opening required for a conventional sliding seal. The HU3 allows for programming camera speed and shutter angle. Power is provided via FM-50 Li-Ion batteries (not included).
Generation 4 (G4) transceivers address the challenges brought about by the proliferation of wireless devices using the 2.4 GHz wireless band. Their new architecture results in a greatly improved ability to reject interference from other devices operating in the same band as well as out of band interference. The improvement in performance is quite significant, typically 10x or better interference rejection than previous transceivers.
In addition, their lower power consumption doubles the operating time of the HU3 on battery power compared to its predecessor. The latest "Blue Dot" version of the transceiver adds channels 30 – 59. These new channels allow FI+Z units to operate in very close proximity (<1m) without interference.
The HU3 integrates its 30 channel, 2.4GHz wireless link into a new splash-resistant housing. Weather-sealed, tactile switches are used throughout. The integrated microwave antenna is protected from impact. The iris slider uses a unique non contact technology to eliminate the opening required for a conventional sliding seal.
Read more about our packages and the included items below.
The MDR-4 takes all the best features from the MDR-3 and packs them into a sleek, compact package. It accepts commands from Preston Hand Units connected via the rugged G4 wireless link and controls up to two digital motors and camera run/stop functions for film and video cameras. The MDR-4 automatically finds the span of the lens once each motor is plugged in, and each channel has its own three-level torque adjustment and direction switch to drive virtually any lens.
Two-channel motor driver (Focus and Iris or Zoom) for digital lens motors
Connects wirelessly to Preston G4 hand controls
Serial port allows connection to the Light Ranger 2 and firmware updates
Analog port enables direct connection to Micro Force and broadcast-style controls
USB port available for firmware updates
Perfect for handheld, steadicam, MÂÂVI, and other lightweight applications
The Analog port lets you plug a Micro Force or broadcast-style control directly into the MDR-4, controlling the motor of your choice as configured in the HU3 Mode menu.
The Serial port connects to the Light Ranger 2, transmitting distance information wirelessly to the HU3 and Video Interface unit. Firmware updates can be loaded through the Serial port or the mini USB port.
The Serial and USB ports also enable real-time lens metadata retrieval, outputting either mapped lens positions or raw digital motor encoder counts. You can jam the internal clock of the MDR-4 through the T/C port, and this timestamp will appear in the metadata stream as well, making it easy to extract and utilize lens position information for post-production.
The Preston HU3 Hand Unit for FI+Z System gives focus pullers not only a robust and reliable unit but one whose controls equip the focus puller to smoothly translate the changing actors' positions on set to a precise movement of the focus knob. The iris slider uses a unique non contact technology to eliminate the opening required for a conventional sliding seal. The HU3 allows for programming camera speed and shutter angle. Power is provided via FM-50 Li-Ion batteries (not included).
Generation 4 (G4) transceivers address the challenges brought about by the proliferation of wireless devices using the 2.4 GHz wireless band. Their new architecture results in a greatly improved ability to reject interference from other devices operating in the same band as well as out of band interference. The improvement in performance is quite significant, typically 10x or better interference rejection than previous transceivers.
In addition, their lower power consumption doubles the operating time of the HU3 on battery power compared to its predecessor. The latest "Blue Dot" version of the transceiver adds channels 30 – 59. These new channels allow FI+Z units to operate in very close proximity (<1m) without interference.
The HU3 integrates its 30 channel, 2.4GHz wireless link into a new splash-resistant housing. Weather-sealed, tactile switches are used throughout. The integrated microwave antenna is protected from impact. The iris slider uses a unique non contact technology to eliminate the opening required for a conventional sliding seal.
Read more about our packages and the included items below.