Preston Light Ranger LR2 Wide / Medium Sensor KIT
The Light Ranger 2 is the first and only focus assist system designed for modern high-resolution cameras. The LR2 incorporates an infrared LED/sensor system with 16 distinct measurement zones, allowing the focus puller to visualize the depth of an entire scene without looking away from the monitor. In this era of shooting the rehearsal, the LR2 provides focus pullers with innovative tools to accurately judge focus distance in even the toughest shooting scenarios.
Each of the 16 simultaneous distance measurements corresponds to a specific section of the image, and is represented with a green/white rectangle overlayed directly on top of the image at that location. The height of each bar corresponds to its distance in relation to the current knob setting of the HU3, giving immediate feedback to the focus puller for how to rotate the knob to bring any object into focus. White rectangles above the horizontal line on the monitor indicate the subject is further away than the current knob setting of the HU3, while rectangles below that line indicate a subject that is closer than the knob setting. Once the subject is within the depth of field (at the current HU3 knob setting), the rectangle(s) over that subject turn green.
The LR2 is ideal for crane, car-to-car, dolly, Steadicam, handheld gimbal, and other shots where the camera is moving. It also excels in low-light and any other shot with extremely shallow depth-of-field.
Features:
Industry-first focus assist system that overlays graphics onto a focus puller’s monitor
Displays distance and depth information for up to 16 horizontal measurement zones across the frame
Two-piece kit: sensor (mounted on camera) and graphical overlay box (mounted on focus puller’s monitor)
Features manual and autofocus modes with seamless transition between the two
Sensor connects to MDR-3 or MDR-4 via Serial port
The Light Ranger 2 is the first and only focus assist system designed for modern high-resolution cameras. The LR2 incorporates an infrared LED/sensor system with 16 distinct measurement zones, allowing the focus puller to visualize the depth of an entire scene without looking away from the monitor. In this era of shooting the rehearsal, the LR2 provides focus pullers with innovative tools to accurately judge focus distance in even the toughest shooting scenarios.
Each of the 16 simultaneous distance measurements corresponds to a specific section of the image, and is represented with a green/white rectangle overlayed directly on top of the image at that location. The height of each bar corresponds to its distance in relation to the current knob setting of the HU3, giving immediate feedback to the focus puller for how to rotate the knob to bring any object into focus. White rectangles above the horizontal line on the monitor indicate the subject is further away than the current knob setting of the HU3, while rectangles below that line indicate a subject that is closer than the knob setting. Once the subject is within the depth of field (at the current HU3 knob setting), the rectangle(s) over that subject turn green.
The LR2 is ideal for crane, car-to-car, dolly, Steadicam, handheld gimbal, and other shots where the camera is moving. It also excels in low-light and any other shot with extremely shallow depth-of-field.
Features:
Industry-first focus assist system that overlays graphics onto a focus puller’s monitor
Displays distance and depth information for up to 16 horizontal measurement zones across the frame
Two-piece kit: sensor (mounted on camera) and graphical overlay box (mounted on focus puller’s monitor)
Features manual and autofocus modes with seamless transition between the two
Sensor connects to MDR-3 or MDR-4 via Serial port
The Light Ranger 2 is the first and only focus assist system designed for modern high-resolution cameras. The LR2 incorporates an infrared LED/sensor system with 16 distinct measurement zones, allowing the focus puller to visualize the depth of an entire scene without looking away from the monitor. In this era of shooting the rehearsal, the LR2 provides focus pullers with innovative tools to accurately judge focus distance in even the toughest shooting scenarios.
Each of the 16 simultaneous distance measurements corresponds to a specific section of the image, and is represented with a green/white rectangle overlayed directly on top of the image at that location. The height of each bar corresponds to its distance in relation to the current knob setting of the HU3, giving immediate feedback to the focus puller for how to rotate the knob to bring any object into focus. White rectangles above the horizontal line on the monitor indicate the subject is further away than the current knob setting of the HU3, while rectangles below that line indicate a subject that is closer than the knob setting. Once the subject is within the depth of field (at the current HU3 knob setting), the rectangle(s) over that subject turn green.
The LR2 is ideal for crane, car-to-car, dolly, Steadicam, handheld gimbal, and other shots where the camera is moving. It also excels in low-light and any other shot with extremely shallow depth-of-field.
Features:
Industry-first focus assist system that overlays graphics onto a focus puller’s monitor
Displays distance and depth information for up to 16 horizontal measurement zones across the frame
Two-piece kit: sensor (mounted on camera) and graphical overlay box (mounted on focus puller’s monitor)
Features manual and autofocus modes with seamless transition between the two
Sensor connects to MDR-3 or MDR-4 via Serial port